BENTLY 3500/40M 176449-01振动监测器模块 3500/40M-01-00

BENTLY 3500/40M 176449-01是一款四通道监视器，主要用于振动和位置测量。它接受来自Bently Nevada接近传感器的输入，然后调节这些信号以提供各种振动和位置测量。调节后的信号可以与用户可编程的报警进行比较，从而驱动报警系统，保护机器并提醒操作人员和维护人员注意关键设备的振动信息。

这款监视器的主要功能包括：

1. 通过连续不断地将机器振动的当前值与预设的报警值进行比较，以驱动报警系统，从而达到保护机器的目的。
2. 为操作人员和维护人员提供关键设备的振动信息。

每一通道通常将输入信号处理成“静态值”，并且每一个静态值都有预设的警告报警值和危险报警值。报警的延迟时间可以通过软件设定。

BENTLY 3500/40M支持的通讯协议

BENTLY 3500/40M是一款功能强大的四通道监视器模块，主要用于振动和位置测量。除了其核心的测量功能外，该模块还支持多种通讯协议，以满足不同工业环境和应用需求下的数据传输和通讯要求。以下是BENTLY 3500/40M支持的通讯协议列表：

1. 以太网通讯协议：

BENTLY 3500/40M模块支持以太网通讯协议，允许模块通过局域网或广域网进行高速、可靠的数据传输。通过以太网连接，可以实现远程监控、配置和控制，提高系统的灵活性和可扩展性。

2. RS485通讯协议：

RS485通讯协议是一种常用的串行通讯协议，广泛应用于工业自动化和监控系统中。BENTLY 3500/40M模块支持RS485通讯协议，使得模块可以与采用该协议的设备进行连接和数据交换，实现多设备之间的通讯。

3. TCP/IP通讯协议：

TCP/IP通讯协议是互联网的基础协议之一，提供了可靠的数据传输服务。BENTLY 3500/40M模块支持TCP/IP通讯协议，允许模块与远程计算机或服务器进行连接和数据传输，实现远程访问和控制。

4. Modbus通讯协议：

Modbus通讯协议是一种广泛使用的工业自动化通讯协议，具有开放性和互操作性。BENTLY 3500/40M模块支持Modbus通讯协议，使得模块可以与采用该协议的其他设备进行通信，实现数据共享和控制。

5. CAN通讯协议：

CAN（Controller Area Network）通讯协议是一种用于汽车和工业自动化领域的通讯协议，具有高速、可靠和灵活的特点。虽然BENTLY 3500/40M模块通常不直接支持CAN通讯协议，但可以通过适配器或网关实现与CAN网络的通讯。

6. 无线通信协议：

BENTLY 3500/40M模块可能不支持直接的无线通信协议，但可以通过与外部无线通信设备（如无线适配器或网关）的连接来实现无线通信功能。这些无线通信设备可以将模块的数据传输到远程位置，从而实现无线监控和控制。

7. 光纤通讯协议：

光纤通讯协议是一种高速、高带宽的通讯方式，适用于长距离和高数据量的传输。虽然BENTLY 3500/40M模块可能不直接支持光纤通讯协议，但可以通过外部转换器或适配器将光纤信号转换为模块支持的通讯协议，从而实现光纤通讯。

BENTLY 3500/40M 176449-01 is a four channel monitor primarily used for vibration and position measurement. It accepts inputs from Bently Nevada proximity sensors and then adjusts these signals to provide various vibration and position measurements. The adjusted signal can be compared with user programmable alarms to drive the alarm system, protect the machine, and remind operators and maintenance personnel to pay attention to the vibration information of key equipment.

The main functions of this monitor include:

By continuously comparing the current value of machine vibration with the preset alarm value, the alarm system is driven to achieve the purpose of protecting the machine.

Provide vibration information of critical equipment for operators and maintenance personnel.

Each channel typically processes the input signal as a "static value", and each static value has a preset warning alarm value and danger alarm value. The delay time of the alarm can be set through software.

Communication protocols supported by BENTLY 3500/40M

BENTLY 3500/40M is a powerful four channel monitor module primarily used for vibration and position measurement. In addition to its core measurement function, this module also supports multiple communication protocols to meet data transmission and communication requirements in different industrial environments and application requirements. The following is a list of communication protocols supported by BENTLY 3500/40M:

Ethernet communication protocol:

The BENTLY 3500/40M module supports Ethernet communication protocol, allowing for high-speed and reliable data transmission through LAN or WAN. Through Ethernet connection, remote monitoring, configuration, and control can be achieved, improving the flexibility and scalability of the system.

RS485 communication protocol:

RS485 communication protocol is a commonly used serial communication protocol, widely used in industrial automation and monitoring systems. The BENTLY 3500/40M module supports the RS485 communication protocol, allowing the module to connect and exchange data with devices using this protocol, enabling communication between multiple devices.

TCP/IP communication protocol:

TCP/IP communication protocol is one of the basic protocols of the Internet, providing reliable data transmission services. The BENTLY 3500/40M module supports TCP/IP communication protocol, allowing the module to connect and transmit data to remote computers or servers, enabling remote access and control.

Modbus communication protocol:

Modbus communication protocol is a widely used industrial automation communication protocol with openness and interoperability. The BENTLY 3500/40M module supports the Modbus communication protocol, allowing the module to communicate with other devices using this protocol, achieving data sharing and control.

CAN communication protocol:

CAN (Controller Area Network) communication protocol is a communication protocol used in the fields of automotive and industrial automation, which has the characteristics of high speed, reliability, and flexibility. Although the BENTLY 3500/40M module typically does not directly support the CAN communication protocol, communication with the CAN network can be achieved through adapters or gateways.

Wireless communication protocol:

The BENTLY 3500/40M module may not support direct wireless communication protocols, but it can achieve wireless communication functionality by connecting to external wireless communication devices such as wireless adapters or gateways. These wireless communication devices can transmit module data to remote locations, enabling wireless monitoring and control.

Fiber optic communication protocol:

Fiber optic communication protocol is a high-speed, high bandwidth communication method suitable for long-distance and high data transmission. Although the BENTLY 3500/40M module may not directly support fiber optic communication protocols, fiber optic signals can be converted into communication protocols supported by the module through external converters or adapters to achieve fiber optic communication.

In stock, please contact:

Whatsapp:+8615359021002

Skype:+8615359021002